POST-CONSTRUCTION CLEANING · DUBAI
Post-Construction & Renovation Cleaning
Staged, top-to-bottom removal of fine construction dust once the trades are finished. Ceilings and high level first, fixtures and joinery next, floors last — so the dust falls onto surfaces still waiting to be cleaned.
Trained and vetted cleaning teams · Carefully selected professional cleaning products
Post-construction work is priced only after we have seen the site. Dust load, floor area, finish types, height access and how much building work remains all change the scope.
Dust settles for days after construction. One visit reduces it; it does not end it.
What Post-Construction Cleaning Involves
Construction dust behaves differently from household dust. Gypsum, cement, MDF and tile-cutting particles are fine, abrasive and electrostatic — they cling to vertical surfaces, sit inside track channels and hinge recesses, and lift back into the air the moment anything disturbs them.
That is why the work is staged rather than done in one sweep. Every area is dry-dusted or vacuumed before anything wet touches it, because wiping dry construction dust turns it into a smear that is harder to remove than the dust was.
Fine dust continues to settle for several days after building work stops, and longer if any trade is still on site. A single visit will substantially reduce the dust load — it will not leave a permanently dust-free property, and we will not tell you otherwise.
Included as Standard
Every post-construction booking covers the following, subject to what is present, finished and safely accessible on site.
Structure and Surfaces
- High-level dusting of ceilings, cornices, ledges and exposed pipework
- Walls dry-dusted, then damp-wiped where the finish permits
- Skirting, doors, frames, architraves, handles and ironmongery
- Switches, sockets, light fittings and accessible vent grilles
Joinery and Wet Areas
- Kitchens inside and out — carcasses, shelves, drawers, plinths
- Wardrobes, built-ins and storage cleaned internally
- Bathroom sanitary ware, tiling, screens and fittings
- Appliance exteriors, and interiors where installed and accessible
Glass and Floors
- Internal glass, mirrors, frames and accessible window tracks
- Sliding-door channels and runners cleared of grit and debris
- Floors vacuumed with filtered equipment, then damp-mopped
- Balcony and accessible outdoor areas swept and washed down
When Post-Construction Cleaning Is Worth Booking
Fit-Out Completion
Once joinery, tiling, painting and second fix are signed off and the trades have left.
Kitchen or Bathroom Renovation
Localised work that has still pushed fine dust through the whole property.
Before Handover
Presenting a finished unit to a client, buyer or incoming tenant.
Before Furniture Arrives
Clean while the property is empty and every surface is still reachable.
Staged Site Cleans
A rough clean between phases, then a final detail clean at completion.
Villa Refurbishment
Multi-floor properties where dust has travelled well beyond the work area.
How the Site Clean Is Carried Out
Staged top to bottom. Dry first, damp second — never the other way round.
Site Assessment
We walk the site, confirm the trades have finished, check utilities and access, assess dust load and finish types, and record delicate or newly installed surfaces before anything is touched.
High Level First
Ceilings, cornices, ledges, exposed pipework, light fittings and vent grilles are dusted first, so what falls lands on surfaces still to be cleaned.
Dry Dust Removal
Walls, joinery, kitchens, wardrobes, doors and frames are dry-dusted and vacuumed. Nothing wet goes near a dry dust film — that is what creates smearing.
Damp Wipe and Detail
Only once dry dust is off do we damp-wipe, working through kitchens, bathrooms, glass, frames, tracks and ironmongery with products matched to each finish.
Floors and Walkthrough
Floors are vacuumed with filtered equipment and damp-mopped last. We then inspect the completed work with you and address reasonable concerns before the team leaves.
Why Choose Our Site Cleaning Team
Correct Sequencing
Top to bottom, dry before damp. Sequencing is what separates a site clean from a smeared one.
New Finishes Protected
Newly installed and curing surfaces are identified at assessment and treated accordingly.
Filtered Vacuuming
Fine dust is extracted rather than pushed back into the air to resettle behind us.
Contractor Coordination
We work to your programme and confirm with you or the contractor that the trades are genuinely finished.
Realistic About Dust
We explain resettlement before the booking, not after. No promise of a dust-free result from one visit.
Our Service Commitment
We inspect the completed work with you and address reasonable concerns before the team leaves.
Post-Construction Price Guide
Site cleaning is quoted only after inspection. Dust load, floor area, finish types, height access and remaining building activity all change the scope.
Apartments
Fit-out or renovation cleaning, quoted on site.
Villas
Multi-floor properties with outdoor areas.
Rough Clean
Interim clean between construction phases.
Final Detail Clean
Completion clean once all trades have left.
Additional Specialist Services
Carpet, sofa or curtain work on the same visit.
Final pricing depends on site size, dust load, finish types, height access, utility availability and the agreed scope of works.
Best possible results are subject to the surface, material, finish, residue type, residue age, curing state and pre-existing condition.
Site Readiness
- All trades finished and off site — cleaning behind an active trade is wasted work
- Builders’ waste, offcuts, packaging and bulk debris removed beforehand
- Protective sheeting, masking tape and floor coverings lifted by the contractor
- Paint, grout, silicone and adhesive fully cured before we clean over them
- Any newly installed or delicate finish pointed out to us at the assessment
- Snagging list closed, or the outstanding items identified so we can work around them
Access, Utilities and Coordination
We need mains water and electricity connected and working on the day. Filtered vacuums, extraction and hot water all depend on it, and a site without power cannot be cleaned properly.
Most Dubai buildings require a service-lift booking, a works permit and contractor passes, particularly at weekends. Those arrangements sit with you, the main contractor or building management. Parking and a loading bay near the entrance make a material difference to the day.
Where a contractor is still finishing, we are happy to coordinate directly with the site manager on sequencing — but we will tell you honestly if cleaning ahead of the remaining work is not worth paying for.
What Is Not Included
These fall outside a cleaning scope and are not carried out unless separately agreed in writing beforehand.
Waste, Trades and Snagging
- Builders’ waste removal, skip loading, rubble, offcuts or bulk debris
- Repairs, snagging, making good, filling or touch-up painting
- Removal of protective sheeting, masking or floor protection
- Handyman work, carpentry, plumbing, electrical or tiling
Height and Specialist Work
- External facade cleaning of any kind
- Rope access, cradle work, scaffolding or suspended platforms
- External glass above ground level, and any surface beyond safe ladder reach
- Heavy mechanical scraping, abrasive stripping or specialist chemical treatment
Where a residue genuinely needs mechanical scraping or a specialist chemical, we will say so and recommend the right trade rather than risk the finish.
Important Limitations and Exclusions
Best possible results are subject to the surface, material, finish, residue type, residue age, curing state and pre-existing condition.
Construction Residues
- Paint specks, overspray and drips that have cured onto a surface often cannot be lifted without abrasive work that would damage the finish underneath
- Adhesive and sealant residue, tape marks and protective-film glue may leave a permanent shadow, particularly on painted, powder-coated and anodised surfaces
- Grout haze responds to normal cleaning only while it is fresh. Cured haze usually needs an acidic proprietary treatment, which is specialist work outside this scope
- Silicone smears, over-run beads and cured sealant on glass or tile are removed by trade methods we do not carry out as part of a clean
Dust, Damage and Outcome
- Fine dust continues to settle for several days after building work stops. We cannot promise a dust-free property from a single visit, and certainly not while any construction activity continues
- Cement bloom, plaster splash, mortar residue and cutting slurry that have bonded to a surface are not always removable by cleaning
- Scratches, chips, dents, tool marks, etching, warping and defective finishes are pre-existing or trade damage and are not corrected by cleaning
- We do not claim sanitisation or sterilisation. This is a cleaning service
- Areas that are locked, blocked, still under work or unsafe to reach cannot be cleaned, and will be reported to you rather than assumed done
Where we can see in advance that a residue or mark is unlikely to come off, we will tell you before starting so you can decide whether to proceed or bring in the relevant trade.
Often Booked Alongside a Site Clean
Move-In / Move-Out Cleaning
A handover clean once the site clean is done and the property is ready to occupy.
Carpet Deep Steam Cleaning
Newly laid or dust-exposed carpets extracted after the dust has settled.
Curtain Steam Cleaning
Curtains hung before completion and coated in fine dust, cleaned in place.
Common Questions
No. Fine construction dust can continue settling after cleaning, particularly while other trades remain active or ventilation systems circulate residual particles. Our service substantially reduces the dust load, but a completely dust-free result after one visit cannot be guaranteed. A light resettlement over the following days is normal.
On most projects, two. A rough clean between phases keeps the site workable, then a final detail clean once every trade has left. Booking a single clean while work is ongoing generally means paying to clean the same surfaces twice.
After the last trade has finished, protective sheeting is lifted, waste is removed, and paint, grout and silicone have cured. Cleaning before those things are done is largely wasted.
No. Waste removal, skip loading, rubble, offcuts and bulk debris fall outside a cleaning scope and need to be cleared before we arrive.
Sometimes, and we will always try where it is safe. Cured paint, sealant residue, tape marks and protective-film glue can leave a permanent shadow, and lifting them often needs abrasive work that would damage the finish underneath. We tell you what we think will come off before we start.
Grout haze responds to normal cleaning only while fresh. Once cured it usually needs an acidic proprietary treatment, and cured silicone on glass or tile needs trade methods — both are specialist work outside this scope.
Internal glass, frames and accessible tracks are included. External facade surfaces and any external glass above ground level are not, and we do not carry out rope access, cradle or scaffolding work.
Yes. Filtered vacuuming, extraction and hot water all depend on mains services being connected and switched on. A site without power cannot be cleaned properly.
Finished the Build? Let’s Get It Clean
Tell us the property size, what work has been done, and when the last trade leaves. We will arrange a site visit and come back with a scope and a quotation.